1 / 3
Reduction of fan 4020 to 3/8 inch (bent)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reduction of fan 4020 to 3/8 inch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Reducer is curved so that the fan does not protrude too much. I uploaded two models and the second model is aligned so that it prints better (towards the mat). You can see this in the picture for one nut, but it works just as well and the nut doesn't fall out.