1 / 5
ExpandaShelf Horizontally Expanding/Expandable Display shelf (Read Description)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the first model I designed in Onshape! Feel free to leave any comments below on how I could improve my design.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
If i can print it successfully on the Anet A8, then you can!
Print Settings
- 0.2 mm Layer Height
- Shelf Body: 10% cubic infill
- Shelf Bracket and connectors: 100% infill and concentric pattern for infill & top and bottom layers to save time
- Outside walls first for best dimensional accuracy
Notes
- Bracket is designed to be compatible with ¼ inch screws
- Each shelf should have one bracket at the edge of each side to hold them completely flat
- When adding on another shelf, make sure to print and screw in another bracket if needed where the shelves connect so it is more stable.