Magnetic Nespresso capsule wall holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an alteration of the Nespresso Capsule Holder to support magnetic attachment. I also did an adjustment to the…
- Ocena
- 4,833 / 5
- Polubienia
- 67
- Pobrania
- 403
- Wydruki
- 8
- Wyświetlenia
- 3210
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alteration of pumikachu's Nespresso capsule wall holder light to support magnetic attachment.
I also did an adjustment to the bottom part for ease capsule release.
Designed to use neodymium magnets with 6mm diameter and 1.5mm height (8 pieces for each support search the web).
Make sure to use neodymium magnets, other magnets may not be so strong and make the support slippery.
Changes:
- Updated the source file to FreeCAD 0.17 with little changes.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
**Resolution:** 0.2mm
Infill:
20%
Post-Printing ============= After printing, just glue the magnets, they should be a tight fit. I used superglue, but had to wait for a couple hours for them to stick. I think there should be better glues for this. How I Designed This =================== I made this alterations using [FreeCAD](https://www.freecadweb.org/) and you can edit it's file to suit your needs. As an example you can easily change the size of the magnet holes and it's placement by directly changing "BtMagnetHolesSketch" and "TpMagnetHolesSketch" (I recomend you to do a Part/Refine after your changes, before exporting it to .stl).
Category: Kitchen & Dining