1 / 3
Dryer Vent Adaptors - 80mm and 100mm pipes — zdjęcie 1
1 / 3

Dryer Vent Adaptors - 80mm and 100mm pipes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A collection of 3 models, - 80mm pipe to wall vent - 100mm pipe to wall vent -Y Piece for 2 100mm pipes

Ocena
5 / 5
Polubienia
11
Pobrania
115
Wydruki
1
Wyświetlenia
604
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a collection of three models to enable a laser cutter extraction vent to my tumble dryer outlet and have the dryer also hooked up. 

The 80mm to dryer vent fits the output pipe from my xtool D1 pro enclosure and onto my wall vent

The 100mm to dryer vent fits the output pipe from my tumble dryer (standard size in the UK). 

The Y splitter enables the two adaptors named above to both be connected at the same time. 

The tape in the pictures is to make them stay in place as the weight of the hoses pulls it down. 

Print settings - 3 walls (they are modelled at 1.5mm wall thickness). Brims are advised as they are quite skinny prints. No supports necessary if printed in the orientation in the picture. 

So far printed in PLA and holding up to the Laser cutter fumes. Not tested with the tumble dryer output yet. 

Tagi