Bumble Bee Refrigerator Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 2-color Bumble Bee Refrigerator Magnet
- Ocena
- 4,5 / 5
- Polubienia
- 42
- Pobrania
- 298
- Wydruki
- 2
- Wyświetlenia
- 811
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for a refrigerator magnet intended to be printed in 2 colors. I've included 2 models; one for an 8mm diameter round magnet and the other for a 10mm diameter round magnet. You can scale the design (X & Y) in the slicer for other diameters. If your magnet is thicker than 3mm you can scale the Z axis in your slicer to accommodate. Leave me a comment if you would like me to submit designs for other sizes. I printed using PLA however other filaments will work just as well. None of the print parameters are critical. I printed on a textured plate because I felt it gave a better finished look. The magnet is a tight press fit so glue shouldn't be required.