GE LED Undercabinet Light Fixture Magnetic Mount/Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip over caps that will allow the light to be mounted with magnets or just to cover the white.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought several sets of GE LED Undercabinet Linkable Integrated Plug Light Fixtures for my gladiator metal cabinets. Unfortunately, the lights are only available in white, with no option for black or magnetic mounts.
I created these covers to slide over the ends of the light to hide the white and allow me to use 5 6mmx2mm round magnets. I chose these since I had quite a few laying around.
I have made them slide on only one way.
The switched end is easy to identify which end slides on first because of the cutout for the toggle light switch. On the other end, the part that comes into contact with the bed has a larger extruded bump stop. The end that will be closest to the light is smaller, enabling it to slide over the end and snap down once it's in place.
I am covering up the toggle since there is a magnet door switch that will toggle on the power strip all of the lights are plugged into when the door is opened.
No special printing is needed or supports.
I printed in Bambu Labs PLA Matte Charcoal.