1 / 3
Stand for an A1 Mini that has the Hula feet installed — zdjęcie 1
1 / 3

Stand for an A1 Mini that has the Hula feet installed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adaptation of the Hula Stand with build plate storage V2 for the A1 Mini. The tolerances are pretty tight.

Ocena
5 / 5
Polubienia
14
Pobrania
85
Wydruki
1
Wyświetlenia
1211
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Shoutout to @c.schwan81 on makerworld → https://makerworld.com/en/models/539757?from=search#profileId-457115


The rails and foot holders are printed in PETG
The build plate storage is printed in PLA
The feet and stoppers underneath are printed in TPU

There should be two .3mf files.  One is for Printers with a larger build plate.  The second (labeled A1 mini compatible) is for printers with a smaller build plate (no smaller than the A1 mini maximum build size)

If you are printing on an A1 mini or similar sized printer, do not adjust the supports.  Supports are painted on for the build plate holder front to make sure they don't go outside the bounds of the printable area.

Additional parts:
2x Countersunk head screw - M4x10
2x Heat set inserts - M4x8.1
Glue or Gloop for the TPU Feet
Hula anti-vibration feet for A1-Mini without the TPU parts by @thrutheframe → https://makerworld.com/en/models/417509?from=search#profileId-319901

Using the same license as the original creator.

Tagi