1 / 7
The Rookie - Halo 3 ODST Poster — zdjęcie 1
1 / 7

The Rookie - Halo 3 ODST Poster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halo 3 ODST is my favorite Halo game within the Series and I wanted to make this my first Hueforge. Please Remix!

Ocena
0 / 5
Polubienia
6
Pobrania
37
Wydruki
0
Wyświetlenia
659
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

**Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 224x199.11mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ IIID Max Blue Transmission Distance: 2.8
PLA+ IIID Max White Transmission Distance: 5.6
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to White for the rest.

I printed this 3 times. With different settings for each.

I included a Light and Dark version of all 3. If you have any questions please ask in the comments.

*********************************

1st: Standard Bambu Lab .20mm settings (except the layer heights & infill, Hotend temp at 215).

----------------------------------------

2nd: Arachne Walls - Hotend Temp at 210

Initial Layer Speed - 45

Initial Layer Infill - 95

Outer Wall - 150

Inner Wall - 150

Sparse Infill - 150

Internal Solid Infill - 150

Top Surface - 150

Overhang speed: 0, 50, 30, 10

Gap Infill - 200

WARNING: This took my comp roughly 30 mins to slice. I have yet to get another print to slice with Arachne walls. idk why, but I'm looking into that, any suggestions would be best.

----------------------------------------

3rd: Classic Walls, everything else same as 2nd, Hotend temp at 210.

This is now my default Hueforge Profile.

*********************************

Tagi