The Rookie - Halo 3 ODST Poster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Halo 3 ODST is my favorite Halo game within the Series and I wanted to make this my first Hueforge. Please Remix!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
**Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 224x199.11mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ IIID Max Blue Transmission Distance: 2.8
PLA+ IIID Max White Transmission Distance: 5.6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to White for the rest.
I printed this 3 times. With different settings for each.
I included a Light and Dark version of all 3. If you have any questions please ask in the comments.
*********************************
1st: Standard Bambu Lab .20mm settings (except the layer heights & infill, Hotend temp at 215).
----------------------------------------
2nd: Arachne Walls - Hotend Temp at 210
Initial Layer Speed - 45
Initial Layer Infill - 95
Outer Wall - 150
Inner Wall - 150
Sparse Infill - 150
Internal Solid Infill - 150
Top Surface - 150
Overhang speed: 0, 50, 30, 10
Gap Infill - 200
WARNING: This took my comp roughly 30 mins to slice. I have yet to get another print to slice with Arachne walls. idk why, but I'm looking into that, any suggestions would be best.
----------------------------------------
3rd: Classic Walls, everything else same as 2nd, Hotend temp at 210.
This is now my default Hueforge Profile.
*********************************