1 / 2
GT86/FR-S/BRZ Forged carbon fiber shifter — zdjęcie 1
1 / 2

GT86/FR-S/BRZ Forged carbon fiber shifter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mold for a “mishimoto style” shiftknob made for gt86/frs/brz.

Ocena
0 / 5
Polubienia
11
Pobrania
59
Wydruki
0
Wyświetlenia
666
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I took inspiration from @kyushaspeed, but i made it from scratch in a different size and to specifically fit the reverse lockout in my gt86.

It's made with m12x1.25 threads but you can use a different insert to fit other cars, just change the model in solidworks.

I've included the model for the shifter so you can test-fit to see if you like it before casting it.

I don't recommend using metal threaded inserts as that may galvanically corrode or ruin the threads on your shift-lever.

 

Guide:

 

Prep:

  1. Print everything
  2. Coat the mold and thread guide in release agent/wax (i used rw4 from easy composits' forged carbon kit)
  3. Apply filleting wax on the threads and thread on the insert, make sure there are no gaps for resin to flow into the insert
  4. Assemble the mold and use a screw clamp to hold the two halfs together

Making the part:

  1. Get ready 59g of carbon tow
  2. Mix up 74g resin (with in2 from ec, mix 57g of resin with 17.1g hardener)
  3. Coat the inside of the mold with resin and start filling it with carbon
  4. Make sure to wet all fibers and fill the mold completely with all the carbon (its expected to overflow the mold)
  5. Now use another screw clamp and slowly force close the top part of the mold letting resin flow out. (i recommend turning the handle a small amount every couple of minutes to not hydro lock it)

If you've used ec carbon kit it should harden in 8-12 hours

 

Post processing:

  1. Open the mold
  2. Sanding all of the surface using low grit and ending with higher grit (400+)
  3. (Optional) Apply a thick coat of epoxy resin and sanding with 400++ grit
  4. Apply clear-coat for a glossy carbon look

Tagi