1 / 2
20x4 LCD Enclosure — zdjęcie 1
1 / 2

20x4 LCD Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A robust enclosure for cheap 20x4 LCD screens.

Ocena
5 / 5
Polubienia
24
Pobrania
243
Wydruki
1
Wyświetlenia
902
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

About

This is an enclosure for cheap 20x4 character LCD displays.  It is designed to be rugged enough for use in rougher environments.  There is a strain relief for the display cable.

For mounting, two M3 threads are available.  See below for dimensions and drill pattern.  A ball joint mount can be found here: Ball joint mount

A variant of the back plate is available which includes an access hole for the contrast potentiometer.

Additional Parts

In addition to the printed parts, you will need:

AmountPartLink
8xM3 L5.7 Threaded InsertCNC Kitchen
4xM3x10 screw for display mounting (e.g. ISO 4762) 
2xM3x8 countersunk screw for cover (e.g. ISO 10642) 

Printing & Build Instructions

Parts should be printed at 0.2mm layer height without supports in the default orientation of the STL files.

The locations for the threaded inserts are marked 1-8.  Be careful to not touch the walls with your soldering iron while placing the inserts.

For strain relief of the display cable, pull zipties through the provided hooks.  For reference:

Tagi