1 / 4
IKEA Ledberg clip for 3030 extrusion (i.e. RatRig V-Core)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Ledberg clip for RatRig V-Core 3.0/3.1/4.0 and other 3030 extrusion printers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mounting clip for IKEA Ledberg led strip on a 3030 extrusion. Used this to mount the strips inside of my RatRig V-Core 3.1 enclosure but it will fit any other printer using this extrusion. I used 2 clips per led strip and printed mine in ABS (encloser is heated and can get to 60C and PETG will loose tension at those temperatures) but in open printers PETG or even PLA will do fine as well. You will probably need a brim on the clip or have an extreme good bed adhesion :)