Bicycle Chainguard 50t
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chainguard for a 50t bicycle chainring, mounted with m4 sinkhead screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I replaced the crank on my tandem bike with one that has a 50t and an 34t chainring I fond online: https://de.aliexpress.com/item/1005002006418047.html
Unfortunately this model was provided without a chainguard so I 3d printed my own chainguard. It is mounted using m4 sinkhead screws. The screws were cut to their desired length using a dremel after they were screwed in place and secured with a drop of locktight. After cutting the screws they were deburred using a circular grinder.
This 3d model only fits on the printbed of the Prusa i3 when disabeling the skirt!