Bicycle Chainguard 50t
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A chainguard for a 50t bicycle chainring, mounted with m4 sinkhead screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I replaced the crank on my tandem bike with one that has a 50t and an 34t chainring I fond online: https://de.aliexpress.com/item/1005002006418047.html
Unfortunately this model was provided without a chainguard so I 3d printed my own chainguard. It is mounted using m4 sinkhead screws. The screws were cut to their desired length using a dremel after they were screwed in place and secured with a drop of locktight. After cutting the screws they were deburred using a circular grinder.
This 3d model only fits on the printbed of the Prusa i3 when disabeling the skirt!