Towbar step
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Every time I put the kayak on the roof of the car and step on the towbar, it gets a little bit tricky. But now with this step it will be easy. And I can sit on it if needed.
Printing
All parts are printable without supports and recommended material is PETG, ASA or PC with 4 perimeters and 30% or higher density of infill.
Pre-assembly
Screw two screws of size M8 with internal hew head and length 20 mm into the LOCK part
Assembly
1st step
You need a European style hitch with a 50mm ball.
2nd step
You put on the tightening nut. Pay attention to its orientation, the nut belongs with the narrower side up.
3rd step
Place the main part on the ball.
4th step
Insert the LOCK part into the BODY section from the top.
5th step
Turn the LOCK part downwards so that the two parts of the thread are next to each other.
6th step
Tighten the nut.