Liczymy pasujące modele…
A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…
Mandalorian Star wars Towbar cap
Hello I prepared the skull cover of the towbar ISO 50. I recommemd ASA or PET-G and 3-4 perimeters. 15-20% infill.
I kept on losing the cap of the Brink BMU towbar. (vertical version) So i decided to make a copy in Fusion360. It is maybe not perfect but does the job very well. I would suggest to print the item on the biggest area and use tree…
This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…
Replacement lock dust cover for Westfalia removable towbar. I found out that I had lost my dust cover when I last went to remove my towbar. Couldn't find it in stock anywhere so I modeled this up in OpenSCAD. OpenSCAD file included. Print…
Spooky Towbar for your car
Created a Towbar and a trailer for a 3Dsets landy( https://www.prusaprinters.org/prints/41264-landy-mini-by-3dsets ) Towbar is the same as for playmobil car. A playmobil boat fits(clips on) on the trailer. Print instructions Category:…
Krytka tažného zařízení. Towing device cover
Towbar plug for Land Rover Discovery 3 (Discovery 4) with two spring size. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Brim: No Supports: No Resolution: 0.2 Infill: 20% Filament: ABS or ASA
print from TPU
Printed with Esun eLastic TPE-83A and 0.2mm layer height. No support is necessary.
Since the key for the Westfalia detachable towbar can't be hang on a keychain this ring will do the job. Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,15…
Print on side with supports (see attached project file for recommended print settings).
The towbar cap with a smiley. You have to fill in the smiley, with a acrylic pen/paint, yourself. Now, a towbar should be 50mm in diameter, however when I tried on different cars there were some tiny differences. Therefore I have included…
Krytka koule ve tvaru ducha
A cover for the hole in the rear bumper of an XC40 for the towbar. It's quite a tight fit. The way it is installed is: Insert the two lugs at the angled end of the cover first (right hand side of vehicle). Flex the cover and insert the…
This is a badge to close the extra two holes on the towbar. Also included a blank back plate if you wish to add your own vehicle logo or if you just like it plain :-)
Replacement towbar for Rolly toys tractor trailer. In time towbar on a Rolly toys trailer the tow bar shows a week point. Usually if it has been overloaded and twisted repeatedly. The model is intended to fit on the trailer when front…
Towbar ball Cover -Cap Ø50mm/2" - Guscio gancio traino Easy to print Optimized filament usage The cover fits the following models: Westfalia Bosal Brink GDW Auto-Hak Oris and all other commercially available ball hitches with a diameter…
I designed one that can be stuck to any flat surface using double side tape. The V2 version i designed to go tightly in the left rear corner of my 5 door 2004 gen2 Toyota RAV4. I used M3 double side tape
The plug fills out the otherwise empty space that previously had enabled water, salt and debris to enter and rust. The bottom part slides in, and the top part is to be inserted and twisted till tight. Fits the Original European detachable…
This is the Solution that we, Team Orbit used for the 2025 4x4 in Schools National Finals. We finished 10th place overall in our category which at that was Development. Kindly do not copy this model and use in the competition. You may…
This adapter ring can be used to fit newer Thule frame clamps on older models of the Thule bicycle racks. This ring will fit any (older) Thule bicycle rack with 26mm tubing and newer bicycle frame clamps for 30-31mm tubing. Also see…
This is the Solution that we, Team Orbit used for the 2025 4x4 in Schools National Finals. We finished 10th place overall in our category which at that was Development. Kindly do not copy this model and use in the competition. You may…
Cap is dimensioned for 50mm towbar and can be printed in both PETG or TPU. The
A little festive cheer for your rear. Add a little bit of Santa magic to your car or maybe print one in green and show your support for the Christmas Elves! Keep your balls clean and warm this Christmas with a holiday hat. Designed to fit…
A replacement for the ACS original towbar holder hole dust cover , which is not holding very tightly in my car In case you want to change any of the sizes, change the parametric size in the model file - the most important parameters are…
This is a towbar for the fantastic @3dsets Landy model 3, 4 and 5. It fits on the rear bumper of the Landy. Use a 1,8mm drill to enlarge 2 of the small premarked holes. Hardware needed: 4x m2x6 1x m2x10 I used the same kind of screws used…
The model is designed for printing with TPU plastic. PETG can be used for the second option. A test version with an internal diameter increased by 2 mm was printed in PETG. It was a bit loose to put on, but held up well. Модель…
The tennis ball is simpler but this is the original, I printed from TPU and this variant worked great. I no longer have a photo or a car, just a 3D model. Tenisák je jednodužší ale tohle je originál, tiskl jsem z TPU a tato varianta…
Dies ist eine Aufbewahrung für den Stopfen der Anhängervorrichtung (Teilenummer 3T0803594 ) In diesem Rexix zusätzlich noch die Abdeckung Anhängerkupplung von ribe integriert. Ich habe noch keinen Testdruck gemacht, es handelt sich…
A cover especially designed to protect the ball of a retractable tow hitch in its folded position from water and dirt. It is unsuitable to use a standard cover for fixed tow hitches on retractable ones. When folded, a standard cover…
Every time I put the kayak on the roof of the car and step on the towbar, it gets a little bit tricky. But now with this step it will be easy. And I can sit on it if needed. Printing All parts are printable without supports and…
