Volvo XC40 Towbar hatch cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover for the towbar hole in the rear bumper of a Volvo XC40.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A cover for the hole in the rear bumper of an XC40 for the towbar. It's quite a tight fit. The way it is installed is:
Insert the two lugs at the angled end of the cover first (right hand side of vehicle).
Flex the cover and insert the lug at the opposite end (left hand side).
Slide the cover towards the front of the car a bit and pop the rearward lug in place.
Then it's easy to pop the two front lugs in place as the front edge of the bumper can flex.
I printed mine in black petg. Don't go too overboard on perimeters and infill as you need to flex the cover to install it.