Slide Locking Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are legs that can be used to secure for example a subwoofer box on slides so that it is secure in your vehicle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
These are some legs that I originally designed to secure my subwoofer box in the back of my car. There is M3 nut and bolt inserts so that the legs themselves can slide onto floor mounted rails and then be screwed into place.
This design prevents side to side movement, and also means that it can only come off the rails in one direction. Ensure that you firmly mount the rails and that they are aligned to where the legs will be so that you have a snug fit.
I printed in PLA and secured with standard wood screws, you will need to use supports elsewhere on this print to enable the slides guide rails to be printed without any supports.
Overall this design has worked well and is very secure in my car, preventing the subwoofer box from moving around. However I am sure the makers on here will find many uses for these legs.