3 Slot MLok Handguard with Continuous Rail for Mosquito Open Beta 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3 slot MLok Handguard with a continuous picatinny rail, supports Miki's tooless hopup.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 971
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v3.0
This is a 3 slot MLok Handguard with a continuous picatinny rail. You can now install things like this comically large M16 carry handle or move your scopes anywhere. Longest inner barrel this version can cover is 173mm.
No supports needed, view last photo for print orentation.
My 4 slot MLok is currently not supported, but I will update it soon.
Front housing replaces 5_Front_Housing, Rear Rail replaces 9_Top_Rail
You'll need:
4x M3x7 or 8mm socket head screws for the front rail
4x M3x15mm Socket head screws for attaching the handguard to the housing
8x M3 hex nuts
2x 3x35mm pins/dowels (same pins used for the reciever) for attaching the front the rear rails
You may need to replace the screws holding 9_Top_Rail with screws that are 1mm longer.
For Miki's Tooless Hopup, you need 1x M5x10-12 hex head bolt.
Thanks to Lukewarm on the Mosquito Discord for helping me test the design and provide photos.