Miyoo A30 Front Plate Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable front plate for the Miyoo A30
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 648
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This front plate is if you want to further customize the look and feel of your A30 without messing with the silhouette of the device that much! Add a nice texture with a textured PEI build plate, or use a patterned plate such as carbon fiber one to give a new look.
BUY THIS PRINTED DIRECTLY FROM MY ETSY HERE
Alternatively, I sell the adhesive by itself in case you want an even coat of non permanent adhesive under the plate. Otherwise, a stronger glue such as superglue (CAUTION: ESSENTIALLY PERMANENT) or a bunch of double sided tape should work well!
This is an easy print as long as your printer has a great first layer. If not, it may look kinda bad. Try to go for a bit of over-extrusion on the first layer if you are manually tuning your printer.
Print Settings
- The bottom of the print should be the front of the device
- Layer Height - 0.16 mm (smaller layer heights
- Seams - use the seam painting tool to not put seams near thinner parts of the model, use this image as an example
