1 / 4
GPU anti-sag stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent your GPU from turning into a heavy metal slouch
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple GPU anti-sag stand with metal parts for durability and reusability. It's fairly small, designed not to steal the show, and keeps airflow unrestricted.
Printing:
Standard PLA printed in the orientation it will stand after assembly.
Parts & Gear:
- 1x M3x10 Allen bolt
- 2x M3 nuts
- Magnet, 6mm diameter and 3mm thickness
- M3 threaded insert (ruthex)
- Felt pad
- Superglue
- Soldering iron
Assembly:
- Insert the threaded insert into the stand part from the top.
- Insert the magnet with some superglue at the bottom of the stand part.
- Place an M3 nut into the bottom of the tip part.
- Screw another M3 nut onto the bolt below to lock the height by torquing it against the threaded insert.
- Glue the felt pad on top of the tip part to cover the Allen bolt.
- Finally, screw the tip into the threaded insert.