1 / 4
GPU anti-sag stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prevent your GPU from turning into a heavy metal slouch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A simple GPU anti-sag stand with metal parts for durability and reusability. It's fairly small, designed not to steal the show, and keeps airflow unrestricted.
Printing:
Standard PLA printed in the orientation it will stand after assembly.
Parts & Gear:
- 1x M3x10 Allen bolt
- 2x M3 nuts
- Magnet, 6mm diameter and 3mm thickness
- M3 threaded insert (ruthex)
- Felt pad
- Superglue
- Soldering iron
Assembly:
- Insert the threaded insert into the stand part from the top.
- Insert the magnet with some superglue at the bottom of the stand part.
- Place an M3 nut into the bottom of the tip part.
- Screw another M3 nut onto the bolt below to lock the height by torquing it against the threaded insert.
- Glue the felt pad on top of the tip part to cover the Allen bolt.
- Finally, screw the tip into the threaded insert.