Fursuit- or puppet-head base - version 57 - toondeer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a deer head base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume).
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). Ventilation holes were added for better heat-exchange. The lower jaw is movable.
I did include the model for the ears, but I do not recommend using those (you do not want rigid ears on a costume, trust me) - use a felt or foam sheet instead.
The model is scaled for costume size (it's about 4cm wider when my own head - I have a small head) - rescale it if you need to. I recommend making the head at least 23cm wide for costume use (this head has smaller cheeks). The current size is for larger heads.
fursuithead57.obj is for people that want to cut the head into smaller parts.
Category: Creatures