Index knuckles controller grips (without hexagons)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Valve's index controller grips, now easier to print! It shifts your hands, making face buttons easier to press.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 79
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified version of Valve's index “Knuckles” controller grips, modified to be easier to print on the classic FDM/FFF style 3D printers.
The grips are intended for folks with big hands / long thumbs, to shift the position of your hand downwards, to make the buttons more easily reachable by your thumb. They also make the grips a bit chunkier, which may be easier to hold with long fingers.
I've removed the hexagons from the inner surface of the grips, for printability. I did this by deleting the geometry of the hexagons, leaving the geometry of the original model intact and unmodified. I also did some simple cuts to give it a flat bottom, and no overhangs, without losing its ability to “click” into place.
You'll need to print it with supports enabled, and probably a brim.
The original model was distributed with Creative Commons Attribution-NonCommercial-Sharealike 4.0 International license (http://creativecommons.org/licenses/by-nc-sa/4.0/) so I must do the same.