1 / 2
Passenger Seat Cowl Mounting Bracket ZX4RR
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ZX4R/RR passenger seat cowl mounting bracket
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The ZX4R/RR passenger seat cowl requires a bracket to mount. If your cheap cowl didn't bother to include one this will save you from buying an OEM one.
Looking at other seat cowls that use the OEM mount, this might have a smaller gap between the cowl and bodywork. If so, that's a great feature.
Printed in PETG, though nylon or a reinforced filament might be better. There's very little stress on this part so PETG should be fine in the long run.
Use 2x M5x12mm or longer bolts to mount.