1 / 4
Adjustable Tablet Holder for Monitor Risers/Desk Shelfs — zdjęcie 1
1 / 4

Adjustable Tablet Holder for Monitor Risers/Desk Shelfs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows you to mount iPads, drawing tablets, portable monitors, or anything else to a monitor riser or a desk shelf.

Ocena
0 / 5
Polubienia
39
Pobrania
176
Wydruki
0
Wyświetlenia
832
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adjustable Tablet Holder for Monitor Risers:
Allows you to mount iPads, drawing tablets, portable monitors, or anything else to a monitor riser or a desk shelf, while still having room underneath for keyboard cables, or anything else you need.


Usage:
The mount clamps to a monitor riser with a screw, can be turned by hand, or with flat blade screwdriver for it to be extra-secure.

The tablet mount itself can be adjusted over a range of angles by removing & re-inserting the locking pin.

I use this to mount my Huion Kamvas drawing tablet to my monitor riser so that it can easily be used as a second monitor, but also within reach to be drawn on when needed.

Printing Guide:
Its reccomended that you print 2 of these to place either side of your tablet (as pictured) for most stability.

  • Will probably want to enable supports for the “Desk Mount” part if you print sideways.
  • Brim reccomended for the “locking pin”.
  • The “Tablet Holder” part has two variants, one has pre-made supports built in for the gap where it connects to the desk mount, and another variant without these supports.
  • There is an STL file that contains all of the parts required, will need to be split into individual parts/objects before printing (this is not print-in-place)

Printed on an Ender 3 v2

Tagi