Ineos Grenadier Storage Tray Insert for Centre Console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage tray for the centre console of your Ineos Grenadier, inserts snugly giving you another layer of storage.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 347
- Wydruki
- 1
- Wyświetlenia
- 1403
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the @chrisbe_318743 cubby box insert. New model which is stronger, easier to print and suits the kind of storage I require for this area. Requires a print bed at least 190mm x 160mm to print upright with bottom of tray on baseplate of printer. Supports required to print the four tabs, I used normal grid 30% density 50 degree overhang. Shown printed in Overture PLA Professional Army Green, wall line count = 4 means solid walls, 30% grid infill. Multiple STL files with different divider configurations.
Update: “Taller Sides” file runs side walls up to top of tabs and has better filleting around tabs, I had a tab fail on a PETG version so tweaked to make the tabs a bit stronger. Had previously been using a PLA version for many months without issue, so might have just had the infill settings wrong.