Ineos Grenadier Storage Tray Insert for Centre Console
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage tray for the centre console of your Ineos Grenadier, inserts snugly giving you another layer of storage.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 347
- Makes
- 1
- Views
- 1,403
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Inspired by the @chrisbe_318743 cubby box insert. New model which is stronger, easier to print and suits the kind of storage I require for this area. Requires a print bed at least 190mm x 160mm to print upright with bottom of tray on baseplate of printer. Supports required to print the four tabs, I used normal grid 30% density 50 degree overhang. Shown printed in Overture PLA Professional Army Green, wall line count = 4 means solid walls, 30% grid infill. Multiple STL files with different divider configurations.
Update: “Taller Sides” file runs side walls up to top of tabs and has better filleting around tabs, I had a tab fail on a PETG version so tweaked to make the tabs a bit stronger. Had previously been using a PLA version for many months without issue, so might have just had the infill settings wrong.