Phantom Plastic Printbody tighter with m8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made a easy to print version of the Body with tighter rolerances and an m8 insert instead of the screw in plastic
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
made a easy to print version of the Body with tighter tolerances and an m8 insert instead of the screw in plastic version. just small but in my opinion good changes for this beatiful project.
It's a tight fit with 0.2mm tolerances so it won't wobble that much anymore and you can avoid using the spring. I changed also the round feets and make them with a false instead, so it's much easier to print.
Additional you can add a big 20mm washer under the self securing nut to spread the pressure better on the movable slab