1 / 2
1/16 RC Truck/Truggy Battery Cage V1 — zdjęcie 1
1 / 2

1/16 RC Truck/Truggy Battery Cage V1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battery Cage To Increase The Physical Battery Mounting Space To Allow For A Small 2S Lipo

Ocena
5 / 5
Polubienia
17
Pobrania
37
Wydruki
1
Wyświetlenia
747
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a battery cage to securely accommodate a small 2S LIPO battery inside of a 1/16 RC Vehicle.

 

Please Note Using A 2S LIPO May Increase The Vehicles Speed If It Does Not Come With One

 

When The “Large” Cage is installed in the vehicle there may be a noticeable bulge to the shell. This is not noticed with the “Thin” Cage But This is at the cost of durability. In Testing the “Thick” cage did not break on impacts but the “Thin” Cage did.

The “Thin” Cage is most suitable for track usage.

 

The maximum battery size is:

73mm X 34mm X 18.5mm

 

The Cage Has Been Designed To Attach To The Vehicle Chassis A Velcro Retention Strap Present in The Battery Tray. The Battery Retention Bar Will Hold In Place Via Standard RC Shell Pins.

 

Installation Video:

Vehicle Shown Is A Blackzone Slyder (Brushed) Stadium Truck

 

List Of Compatibility Tested 1/16th Scale Vehicles:

Blackzon Slyder (Brushed)

Blackzon Slyder (Brushless)

 

List Of Untested Compatible 1/16th Scale Vehicles:

FTX Tracer

HBX 16889

 

List Of Compatibility Tested Batteries:

2 Cell Lipo:

Zeee 2S Lipo Battery 2200mAh 7.4V 50C RC short Battery with Deans Plug

BlackZon Battery Pack (LiPo 7.4V, 1600mAh)

 

3 Cell Lipo:

Radient LiPo 3S 1000mAh 11.1V 30C

 

 

Example Prints Shown In Images Are Printed On A Bambu Labs P1S From Anycubic PLA+ Black

Tagi