1 / 5
Gridfinity Cleco Plier Insert
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity solution for storing cleco pliers vertically, also know as sheet metal fastener pliers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
This insert was designed to save space by storing my cleco pliers vertically, this also helps prevent the pliers from flailing about when the drawer is shut in a rush. This should work for most cleco pliers on the market, as it appears they all come from the same factory in Taiwan.
Confirmed works with Snap-On Sheet Metal Plier ATI508S, and ATI508SG
I haven't confirmed if this bin works with 90-degree and spring loaded cleco pliers at the moment
Files included
- Half Step will utilize a 4.5u x 1u space, using my half grid box template (21mm grid instead of 42). This allows me to make more compact units for my personal tools, and more granularity when designing/laying out my storage bins.
- The second file will utilize the standard 42mm grid and occupy a 5u x 1u space, but still sport the nifty 21mm x 21mm grid for the extra placement options.
Recommended print settings: Printer: Prusa i3 MK3S+
I use the following settings:
- 0.3 mm layer height
- 2 walls
- 15% infill (rectilinear)
- 3 top layer
- 2 bottom layer
- Arachne wall generator