SD card holder Zippo style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for SD cards and microSD adapters made in Zippo style.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 3
- Wyświetlenia
- 334
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The container has 4 card slots.
When opened, the cards rise up in steps.
Assembly.
The holder consists of 5 parts.
First install all the internal elements, then install the side wall. The side wall is attached using regular filament (the holes for the filament are 1.8mm). I also used glue.
3D printing settings
All models are already rotated for optimal printing.
I printed PETG;
layer height 0.2mm;
3 walls;
filling 10%;
all parts are printed without supports;
The Cap part must be printed with supports.
UPDATE!!
A second version has been added, with a latch to prevent the lid from opening so easily.