1 / 6
Stool - Adapter to make a Stool or Side Table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stool or side table made with printed adapters and off-the-shelf wood components from the hardware store!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Build List:
3x Printed Adapters
3x Wooden Dowels (1.5 in Diameter)
1x Wooden Circle (15 in Diameter)
24x Wood Screws (Cabinets Screws 8 x 1-1/4")
Instructions:
- Print the Adapters
- Cut the Wooden Dowels to the desired length (I used a hand saw)
- Slide the dowels into each leg and pre-drill the holes into the legs, using the adapters as a guide
- Screw the adapters to the legs before attaching to the Wooden Circle
- With your assembled legs, mark and pre-drill into your wooden circle
- Attach the assembled legs to the wooden circle, making sure to have the legs leaning outwards
- There is a little nub sticking out of the adapter (shown in photo) that point inwards to the center of the wooden circle. Use those to align the legs in the correct orientation.
- (Optional) PAINT TIME
- You can paint or stain your finished product to customize it how you want!
Stool: Legs should be 22-25 inches long
Side table: Legs should be 15-20 inches long
These heights might vary a little bit depending on the exact spot that you need them to go. I used mine for my kitchen countertop bar area and the legs are 23 inches long.