1 / 1
Samsung Galaxy Z Fold4 Tripod Mount with 1/4" thread
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tripod mount for the Samsung Galaxy Z Fold4 with a threaded screw hole for the 1/4" standard tripod mount.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Recommended settings:
- Infill: gyroid, 10-15% (do not add too much as this will reduce the required flexibility of the prongs at the sides)
- Layer height: .1mm
It may be necessary to warm up the hole section of the part a little bit in order to properly get the screw in, I suggest using a heat gun at 170°C - 200°C and around 50% airflow for about 30 seconds before forcing the screw in.
If you don't have access to a heat gun you might also try printing the test file several times while trying different scaling options until you find what fits your printer's capabilities (use “Thread sample.stl”).