1 / 1
Samsung Galaxy Z Fold4 Tripod Mount with 1/4" thread
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tripod mount for the Samsung Galaxy Z Fold4 with a threaded screw hole for the 1/4" standard tripod mount.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
Recommended settings:
- Infill: gyroid, 10-15% (do not add too much as this will reduce the required flexibility of the prongs at the sides)
- Layer height: .1mm
It may be necessary to warm up the hole section of the part a little bit in order to properly get the screw in, I suggest using a heat gun at 170°C - 200°C and around 50% airflow for about 30 seconds before forcing the screw in.
If you don't have access to a heat gun you might also try printing the test file several times while trying different scaling options until you find what fits your printer's capabilities (use “Thread sample.stl”).