Counting matching models…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
V1 I designed and printed this to replace the existing pin for my bifold closet door. There was an extra gap at the top of the door, causing the existing pin to slide out of the track. The design is longer than the original to account for…
Print Instructions & Recommendations: It is highly recommended to clean the build plate with warm water and soap prior to printing to eliminate the potential adhesion problems. No support is required. 3MF files prepared in PrusaSlicer are…
This accessory is designed to optimize clothing storage in a closet or on a rack. It features two hooks at each end, allowing it to be hung either horizontally or vertically. Its structure includes several slots or holes to hold multiple…
Background I wanted a way to bring some pills with me on an upcoming bike trip so I designed this easy-to-print TPU pill box. My primary requirements were that it needed to stay closed while rattling around in my bike bag and that it…
This model uses one M3 20mm long bolt to hold the hook in place. You will also need a M3 thread insert and two small cylindrical magnets of Ø6mm .
Foldable 5-Point Star with Textured Build-Plate Finish This model is a simple, foldable 5-point star designed to take full advantage of textured build plates for beautiful surface finishes. Each point is printed flat on the bed so the…
A foldable 24 inch ruler intended for use with Battletech: Alpha Strike and similar games. Designed from scratch to be more compact than https://www.printables.com/model/1544863-foldable-wargaming-ruler but with length obviously the same.…
Folding laptop leg, you need to stick it with good tape because it can peel off. Printed on 50% PLA-HS esun material on a k1 printer.I made a larger foldable leg for a 17-inch laptop. It does not require such strong tape and you have to…
Print with a higher nozzle temp, as the handle has snapped on me during testing. This is designed for the Gen 2, not sure if it's compatible with other generations. Retains auto-deploy functionality when the rifle is unfolded. For now,…
Drill template for the foldable handle from Auer Packaging: https://www.auer-packaging.com/de/en/Foldable-handle/E-KG-G.html This can be used to easily drill holes giving a centered position on the longer side of a 30 x 40 case. This was…
A cap for the top of a bifold door that holds the two panels open at 65°. Fold the door to about 65°, then press the holder down over the top edges at the hinge. Fit For panels 35 mm thick, hinged with about a 5 mm gap between them Slots…
This model is compatible with the lego system.
The Stand This foldable book stand is designed to make learning more comfortable and use desk space more efficiently. The design in question, went through multiple iterations. This final version is robust and stable enough to even hold…
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
The Pixel 9 Pro Fold's wireless charging coil is too low to properly align and charge on the Pixel Stand 2. This riser's height is based on multiple measurements of the internals of the PS2, and a calibrated reference photo (provided by…
Need a scratch your back? No problem! Print in place model with lock mechanism. No supports! From fast print with layer 0.35mm to 0.2mm work pretty well. I recommend use PETG. Easy to transport due to fold-ability! Folded version is 140…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
Everyone has one, like pens they vanish into some parallel dimension, they do break if you really need them. A folding ruler 2m to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable.…
book is available here: https://www.zupagrafika.com/shop/brutal-poland
A foldinge ruler 3m (extended edition) to measure furniture, rooms or makes. This model provides insets for 10x2.5mm round magnets as hinges and 6x2mm magnets for stability and snap into position. They all should be aligned in the same…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
I have prepared a simple folding Christmas star in Origami style. It is printed in a flat shape. Two identical parts are folded into a four-pointed star, and then they are connected with a joining piece. To ensure successful printing and…
Bone folder paper creaser fit for sewing, scrapbooking, card making, school homework DIY crafting project, handmade books, bookbinding, office supplies and other paper crafts and to serve as Gift Wrapping Helper. Usage video: Idea for…
Hi, Here's a sheepfold or stable kit, you can make using laser cutting or 3D printing. For laser cutting, the thickness is designed for 3mm wood or cardboard. It is possible to scale it for another thickness. - 2 x Cote - 6 x Toit - 1 x…
foldable present to put a gift inside and give to your loved ones
A 3D-Printed 3-Piece Tree is a creative and modular decorative object designed to capture the essence of a tree while showcasing the versatility of 3D printing. The tree typically consists of three interlocking or stackable parts: Base…
For “Kobalt Compact Lockback 3/4-in 1-Blade Folding Utility Knife” Uses the Peggit mount . I printed facing up with support under the middle of the Peggit mount in the back. Includes a holder for the spare blades.
Install a rangefinder in the SpeedyBee Mario Fold 8 for accurate altitude measurement. The model is designed to mount the TF-Luna lidar longitudinally to the frame, utilizing the existing mounting holes that are spaced 25mm apart. It is…
Uses 3 #10-24 screws, a random spring, and a nail Latches ok and is stiff enough for me, but not perfect Print all the mounting parts solid for maximum stiffness Fits -…
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
Update 22.03.2025 The files have been updated to simplify assembly, especially when connecting the parts using filament. Additionally, the left and right top parts can now be joined with an double hinge, allowing the board to fold…
This object is designed to be printed in place. The hinge is strong and has a tolerance of 0.4 mm. Once folded, it's clipped and will stay closed. 2026/04/08 : v3.1 is a highly optimized version with small tolerances (0.25 mm), thus…
This is a folding propeller I created years ago. I flew this propeller myself on upscaled (130%) versions of the Nucking Futs printable pylon racer. Link to Airplane: https://www.thingiverse.com/thing:3358880 Please give credit to the…
A set of modular scaffolding to create towers and bridges connecting them for DnD and other TTRPGs. They are made to use as little space as possible for storage, while still functioning well. Sizing is for a 25 mm/1 inch grid. The sizes…
I recently needed a simple way to manage some over-long ribbon cables. This clip does the job for me. It could easily be scaled in the slicer for some additional sizes. If it is needed I can easily add extra slots or change sizes in the…
New (July 2026) : Reworked the sliders to fit and slide more smoothly. ------------------------------ This is a headband, inspired by Sennheiser PX100, can be folded and size adjusted. It's designed primarily for KSC75 but can be used…
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
1/8 scale remix, M3 screws needed. 2x M3x8mm + 1x M3x12
Uchwyt pasuje do Qbrick System Pro 2.0, One 2.0, Prime i wykorzystuje oryginalne Qbrick connectors. Składany taboret występuje pod kilkoma markami, więc nie będę ich wymieniał. Potrzebne będą: oryginalne konektory Qbrick (te czarne…
Zusammenklappbarer Cupholder für Unterwegs oder fürs Büro :-) Benötigt werden zusätzlich 4x M2x12 Schrauben. Der Halter besteht aus 1x Griffteil, 2x Seitenteil, 2x Becherhalter Gesliced einmal in 0,2mm und 0,3mm jeweils in PETG und ASA.…
Minimalistic folding feet for laptop rear side elevation and better air flow - heavy duty version. It's easy to print and assemble. This version is focused around Cat Paw styling (PUNI) with features: let you laptop spread its paws with…
This is a seven blade fan when spread out meant to look like a lotus flower. Each blade is 7 inches long
Print with 20 walls, 0 top and bottom layers and 0 infill Check out the video here:
I love Chris W's cribbage board design. and have made a few. I had a couple issues that I decided to provide a solution to. First I found the pegs a bit small for easy handling so I designed some slightly larger ones. And second the…
Hello everyone. This is my first Printables 3D model and its nothing fancy but first thing I designed that I think would be universally useful to other people. I lost that metal fastener which clips the metal prongs that go through the…
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
A wireless charging dock for the Unfolded Circle Remote 3 that can accept MagSafe (56mm) or third party (58mm) wireless chargers. The base and cover are universal; just pick which cradle charger size you need and print accordingly. I have…
It's a stand. For hand fans. Remixed from osbock I found other fan stands (not here on printables) but they were a bit small and tight. This design is also parametric so you can tune the height and slot size by editing the spreadsheet in…
Charging Stand for the Galaxy Z Fold 7 and probably the fold 8. Don't have a 3d Printer / Want one ready made? I sell fully printed and assembled ones on my etsy! [Purchase fully assembled stands] Where to purchase the Magsafe Charger...…
What? A Bike handlebar alignment tool that doesn't require hardware or tools or lasers - just hook it on the handlebars and go! The tool aligns on the handlebars and rests on the headtube. Slots in the gauge are sized for a variety of…
I recommend applying a resin coating if you want to use the flowerpot as a water reservoir. When in contact with the soil, consider using eco-resin that is safe for your fragile plant.
The model was modified to allow the stock cover to be opened. For this, the rear brackets were equipped with heat-inserts to secure the hinges. For the lid, I used the "Prusa Core One Magnetic Top Cover with Integrated Vent Handle"…
Folding Box Template for 400mm 10W LASER may be adjusted for other cutters. Add logo, etc. Recycles thin corrugated cardboard into a nice interlocking box. To cut and score box in one file, get my fork of the free and open-source…
This model is one of the collection Prêt à Faire: Printable Readymade Models For advanced makers who relish the challenge of creating a full-scale version, join my Club for access to the Full Scale Edition. 1 | Concept & Provenance Of…
****************** Long Shaft Servo Discontinued ****************** The long shaft servo was discontinued :(. I removed the alpha 0.1 printable mount for the short shaft motor as it didn't work. I'm working on a new mount that shifts the…
I wanted a flexible minimal billfold to carry some paper money around with me. Wallet.scad modified by me to do a zero-card slot wallet or a 1 card slot wallet. Modified from the one by jurriaanpruis on Thingiverse:…
This is a print that can be folded into a 141.25 :1 model of the Boeing 787-8
After the old feet on our clothes airer wore through and it started scratching the floor and leaving rust stains, I designed new feet that are correctly angled to sit flat on the floor.
Let your phone relax to the max :) Flexible fabric was created with my 6 KByte endless fabric Printing Printed in PETG / 0.3 layer height PLA should work too (needs proper bed adhesion) Don't use supports or brim (would be hard to remove)…
Something to stop the folding portion of the BRÄNNBOLL Gaming Station table top at an angle instead of going all the way to flat. There's also some circular storage spots in the bottom part of the bracket. Installation is with some double…
Foldable dust cover for 80% keyboards. 355mm x 135mm Use piece of filament as hinge pin. Dust cover measurements: Inner width: 349 mm Outer width: 255 mm Inner height: 124 mm Outer height: 138 mm Print with no support and ≥ 20 % infill.…
Foldable 5-Point Star with Textured Build-Plate Finish This model is a simple, foldable 5-point star designed to take full advantage of textured build plates for beautiful surface finishes. Each point is printed flat on the bed so the…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Folding chair feet for 7/8" ( 0.875" ) diameter legs. Rounded to conform to angles on the floor. Print with outer brim, support, random seam and 100% sparse infill. Recommend TPU filament.
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer…
A lot of paper lanterns are made by soaking a wood or fiber to make a flexible scaffold on which paper is glued. I wanted to make a paper lantern using an LED light, but couldn't find any files. It was easier to make my own scaffold than…
12/19/25 update to release V2 based on feedback from an owner of the JO/EL intake: -Changed the cutouts under the venturis from spherical to conical. -Changed engine side venturi cutout diameter from 36mm to 37mm. -Changed non-engine side…
This is a pencil case I designed it holds 21 standard pencils ,Pictured with Kalour brand but Staedtler pencils also fit . I used 4 5x2mm magnets to hold it closed. you should need no supports for the holes, as I printed with none. I used…
This printed exactly as shown, no supports, using a 0.6mm nozzle. It is an easy press fit into the hollow leg of a Lifetime folding chair, because for some reason those feet go missing.
A connector for 3 broomsticks in a perpendicular placement. Print 2 identical units and connect with a 35mm long M5 bolt with wide washers on both sides. The connector can be mirrored if you desire a left handed axis placement.
This is my try of a Silica holder for Creality K2 Plus CFS. I tried and 3d printed some other models but i was not happy by the capacity or the print time and structure. So i give it a shot. I knew i wanted to try a folding structure to…
A square gift box decorated with a heart pattern, created to be printed flat and later folded into shape. The box is designed as a single unfolded piece consisting of five connected faces, allowing for clean printing, sharp details, and…
Compact Folding Phone Stand with Integrated Ring Holder A sleek, portable, and functional 3D printed phone accessory! Tired of flimsy phone stands? This design offers the perfect solution for anyone needing a reliable and portable holder…
Introducing the Playfold MegaBSB - an adaptor which replaces the face plate of the Meganex Superlight 8k to allow it to attach to the Bigscreen Beyond Audio Strap, while retaining the flip up display and angular adjustment capabilities of…
BOM Model : MPI5001 (Capacitor touch) screen. https://www.lcdwiki.com/zh/5inch_HDMI_Display-D M2.5×8mm BHCS × 4 (For mounting the screen) M3×8mm SHCS × 4 M3×10mm SHCS × 2 M3×12mm SHCS × 4 M2×10mm Self-Tapping Screw × 4 M5×10mm BHCS × 2 M5…
This is to put a 1913 picatinny folding stock on your Cobra Adder crossbow. This model does fit snug so don't feel shy about using a machinist's hammer with a rubber tip to knock it down in there. (To remove you may need to pry it out…
You print, remove the supports, or glue them together, but you don't have to, the model holds together.
I wanted a display for my torx drivers that would let me store them, transport them, or keep them on my desk on hand for a quick grab. This box takes care of all of that! Using PETG filament as hinge pins, printed with PLA, this box takes…
I needed a way to mount my old phone to the wall for a dashboard installation. As I was unable to find any prior work for this, I made own rudimentary prototype. It is mounted to the wall using 2x 4mm screws, and the face plate is mounted…
Medium size - for 19X61mm blades... No screws required .just plastic and blade... Easy to install - as shown in the picture - closes with a click similar to a folding knife. Note: You may need to file down the area of movement if there is…
Small enough to fit in a pocket or bag... Opening and closing it is a bit of a mystery.... yet practical for holding your mobile vertically or horizontally - two tilt settings Easy to print without any support or extras..It closes…
Regular size.... No screw needed... Plastic and 19x61mm blade only. Easy to install - as shown in the picture - closes with a click similar to a folding knife. Opens and closes firmly.... it opens at a 15-degree angle from straight...No…
A Windows OS file folder looking case for the Western Digital 1TB My Passport External SSD. VERSION 2 currently in development ;) I never like how the original casing looked like, and found no suitable casing for this model. Before…
It is designed to hang directly on a wall outlet, providing a convenient shelf for your phone while it charges. The shelf and hook should ideally be 3D-printed from ABS or PETG, while the rubber ring and anti-slip pads are best made from…
Sliding Bifold Door lock for small kids and cats. I liked the idea of a poll coming down so I didn't have to reach as high to slide the lock back and forth. They were $15 on amazon so I created my own. I made it so you could pick up a…
A detailed sci-fi female bust featuring a blindfolded warrior holding a glowing energy blade.
Foldable Over-Sink Dish Drying Rack A modular, foldable dish drying rack designed to sit over a kitchen sink — saving counter space while keeping dishes organized and air-dried. The rack folds flat for compact storage and can be resized…
Showcase the incredible versatility of 3D printing and modern filaments with this organic 3-way manifold sample. Designed to look like a complex technical automotive part (like an exhaust collector or intake), this model serves as a…
A 3-inch (9cm) square wall at a 30mm scale that can be folded in half to make curved walls or 90-degree corners. It is printed as a single piece and does not require supports, but if you leave them active, it provides a better finish on…
I wanted a display for my hex drivers that would let me store them, transport them, or keep them on my desk on hand for a quick grab. This box takes care of all of that! Using PETG filament as hinge pins, printed with PLA, this box takes…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A Crossbow like mechanism to replicate the arms from Unika's weapon in GG Strive. This was made with smaller printers in mind, this is version 3 but the others were too big. When making this model, there is very few things that are needed…
This is a work pad or work surface, which folds. A handy dandy little thing for everybody who wants a nice and easy way to turn their desk space, into a creative powerhouse. Or you know, just to protect the surface on which they are…
Stylish two-part, foldable letters with space for an LED strip and a cable hole. Easy to scale, printed without supports. The files include: all letters together, each letter separately, and an additional combined version with a separate…
Use filament hinges for the legs. 3 walls and .16mm layer height works well. The little fences fit losely in the holes, they can be printed a bit thicker if you want a more secure fit. The base is the hard part, such a large part can be…
