Fireguard Removable Bracket (allows easy folding/storage)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.45 – €0.55 net (excluding VAT)
For file: FireGuard Thumb Screw Clamp (Clamp & Thumb Screw)_0.4n_0.15mm_PETG_COREONE_32m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 31.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replaces fixed brackets on a fireguard, allowing for thumb screw disassembly to fold the fireguard down for easy storage
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
No matter what! Always supervise your kids and pets!
I wanted a way to fold down the fireguard but the brackets that hold the vertical to the horizontal panels are screwed in tight! There was no easy way to disassemble the fireguard to be able to store it flat, until now.
Using hot melt nuts (M3x4x4.2), some M3x16 and M3 nuts, I made this hinged design to snap on and be screwed into place tight. It fits the profile of a few common fireguards on sale in Ireland/UK. There is a notch for the thinner bar to help keep this bracket in place. Use a minimum of 2 brackets per side!
Use PETG (or something strong, I would advise against using PLA due to weakness and hear).
When taking it of the print-sheet the first time, give it a solid and firm closing movement, the hinge as some clearances set that was calibrated for PETG.