Cable/Test Lead Hanger/Holder (Clamp-On)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps onto workbench shelf or lighting rack...
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Small clamp-on cable hanger for your electronics lab… Clamps onto workbench shelving, light scaffolding, etc. Cable slots are ~5mm wide.
Printing:
No support required for the supplied orientation. Suggest 3 perimeters and ~25% infill for strength. Note that you'll need to print the bolt corresponding to the side you're using. Sorry--it became slow/tedious enough trying to work with the mesh that the two sides are a simple ‘mirror’ of each other. I'm not trying to start a left-hand thread trend--just being lazy.
Thanks to McAbra for the original design--I use several of his headphone holders around the house/home office…