1 / 2
Arduino Uno Electronics Sled for BT-80 (2.56 in) Model Rocket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is optimized for the Arduino Uno R3 in a model rocket with an inner diameter of 2.56 inches (65 mm).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is optimized for the Arduino Uno R3 in a model rocket with an inner diameter of 2.56 inches (65 mm). I would suggest printing it at 0.2 mm layer heights in the orientation shown in the 3MF.