1 / 2
Arduino Uno Electronics Sled for BT-80 (2.56 in) Model Rocket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design is optimized for the Arduino Uno R3 in a model rocket with an inner diameter of 2.56 inches (65 mm).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 1
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is optimized for the Arduino Uno R3 in a model rocket with an inner diameter of 2.56 inches (65 mm). I would suggest printing it at 0.2 mm layer heights in the orientation shown in the 3MF.