Prusa MINI Enclosure PSU mount fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix, which allows to use the included screws to mount the PSU on the MINI Enclosure.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 344
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Very simple model - it's really just 2 washers that allow mounting the PSU with the included M3x8 screws.
The original PSU mount listed on the official Enclosure page does not take into account that the screws are too long and normally protrude into the PSU, making it impossible to slide it in the mount.
I've made 2 washers to make extra space on the outside of the enclosure. The left washer is 2mm since the screw behind it only touches the metal wall, while the right washer is 1,5mm because the screw goes through the metal wall and acryllic side window.
It would be much easier to mount this without the printer inside, but it's still possible while the printer is in.
Check the pictures for an explanation on how to mount.