1 / 6
THE FILTER with Voron Design Language on the lid and Slightly different housing (A Type Pogo Pin Support)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
THE FILTER with Voron Design Language on the lid and Slightly different housing (A Type Pogo Pin Support)
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 947
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (44)Powiązane
First and foremost thank nateb16 for creating this great filter for Voron.
I designed a lid to suit my Voron 2.4 with standard size bed gap along with slightly different housing which is a divider in the middle for active carbon section and wider wiring route on the bottom.
UPDATE:
- I bought #A Type(180 Wire Female 1set) pogo pin that original housing does not support. So I modified the housing to support it along with small friction fit backer.
- I modified the housing by adding 2 straight poles to secure 5015 Fans. It works well with Winsinn and Sunon 5015 Fans. However feel free to modify.
- Mounting Brackest has been modified to use M3 SHCS bolt, mounting sides are now a little bir chunky now.
#A Type(180 Wire Female 1set):
