Water temperature sensor shaft for swimming pool plumbing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for DS18B20 or LM35DZ and ready for insertion into pipe with help of intended drilling part.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric M18x1.5 for PG9 waterproof grommet at the end (optional). This sensor shaft shouldnt be inserted directly into pipe, but into intended drilling part, witch you can buy or print also - look into my other models.
Printing:
- print in vertical position
- meterial: PETG/ASA/ABS
- infill 10%
- no support
Sealing o-rings:
- 18x2.4 or 18x3.1 under the shaft head
- 16x2.4 for PG9
Before insertion of PG9 into the shaft put the nut out - use without the nut.