Water temperature sensor shaft for swimming pool plumbing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.53 – €0.65 net (excluding VAT)
For file: TEMP_SENSOR-SHAFT_v2.1-G1!2+PG9.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.59 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed for DS18B20 or LM35DZ and ready for insertion into pipe with help of intended drilling part.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 44
- Makes
- 0
- Views
- 485
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric M18x1.5 for PG9 waterproof grommet at the end (optional). This sensor shaft shouldnt be inserted directly into pipe, but into intended drilling part, witch you can buy or print also - look into my other models.
Printing:
- print in vertical position
- meterial: PETG/ASA/ABS
- infill 10%
- no support
Sealing o-rings:
- 18x2.4 or 18x3.1 under the shaft head
- 16x2.4 for PG9
Before insertion of PG9 into the shaft put the nut out - use without the nut.