Tassimo Capsule Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to help take apart Tassimo capsules for recycling.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 69
- Wydruki
- 2
- Wyświetlenia
- 465
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
About
A tool to help take apart Tassimo capsules for recycling (and maybe get that last bit of the
chocolate powder out too :-). Just push the two concentric rings into the hole in the center of the capsule and rotate the arm to cut off the foil lid. Use the other end of the tool to scrape out the coffee dregs.
Printing
Prototype printed in PLA with variable layer height to get more accuracy on the edgy parts, 0.2 mm base layer, 2 perimeters, 0.8 mm solid layers, 25% gyroid infill. This seems to be sturdy enough for repeated use.
The exact dimensions of the center rings depend on the printer tolerance, hence models with slightly different gap sizes are included. A gap size of 5 or 6 seems to be a good start, move towards larger gaps if the tool seems too tight and vice versa.
Sources available at https://github.com/ceresek/prints/tree/main/things/tool-opener-tassimo.