Liczymy pasujące modele…
Here in France, a refill cartridge contains 8 capsules. The new design is now provided in 3 variants and sizes. Sizes / Capacity : • M : 9 capsules • L : 13 capsules • XL : 17 capsules Objects are optimized for a line width of 0.5 mm.…
Zum drucken habe ich 2mm Layerhöhe mit 15% Infill genommen die Schraube habe ich mit 100% Infill gedruckt. Die Datei ist als 3MF hochgeladen. wünsche euch viel Spaß beim drucken. Ist sehr gut geworden
Tassimo pod holder with 4 columns that turn by turning the top wheel.
I bought that reusable cup from aliexpress, but the coffee needs to be evenly pressed. The spoon that comes with it is not good enough for pressing the coffe all around. I know the handle is not so ergonomically into due to those edges, I…
Hier ein 6 Fach Halter für Bosch Tassimo Kapseln.
For this capsule https://www.aliexpress.com/item/1005002244563376.html
# SCAD-tassimo_tamper This is a tamper for coffee. Use this with a reusable coffee pod that fits a Tassimo Machine. I designed it to fit a metal one, but should also fit the plastic ones. Strangely, the plastic ones often come with a…
This is a simple stacker for Tassimo capsules. You can expand it by placing copies with a distance of 72mm from each other in PrusaSlicer (see pictures). Put some rubber feet underneath if necessary.
Just clip in the tassimo capsules. The mount grabs into the holes of the paper box. Print one or 3 connected. Use some small screws to mount it to your kitchen.
I bought a Bosch Tassimo machine and was disappointed that the pods are re-usable. So, I bought re-usable ones from Amazon with a container and rubber lid. However, to make a good cup of coffee, a tamper is required to push down the…
Es werden 20mm Saugnäpfe dafür benötigt. die Menge variiert nach den jeweiligen Untergrund. https://de.aliexpress.com/item/10000381569272.html?spm=a2g0s.9042311.0.0.27424c4dAmAJpm Category: Household
Got this from another site couldn't find a double one on here so thought I would share it here
Made a Tassimo Funnel for reusable Capsules as my wife kept complaining that I'm spilling the coffee powder everywhere. Probably need to scale it a little bit to make it fit your capsules.
Eine Einfache Wandhalterung für Tassimo Kapseln im Karton .
About A tool to help take apart Tassimo capsules for recycling (and maybe get that last bit of the chocolate powder out too :-). Just push the two concentric rings into the hole in the center of the capsule and rotate the arm to cut off…
Tassimo Hänger - zum kleben oder schrauben
Print Settings Printer brand: Anycubic Printer: i3 Mega X Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Any Filament color: Red Filament material: PetG
This was originally for 3D rendering purpose but I decided to share it for fun. Printing it upside down as is won't require supports.
Tassimo-Kapselhalter (14Kapseln) als Inlay für Schublade IKEA Maximera ausgelegt um in die flache Schublade zu passen mehrere kommen nebeneinanger bzw voreinander
Just a lid for the tassimo dispenser.
Hello, Sharing my project of Tassimo coffee pods/capsules dispenser, which can be mounted on the wall :) Dimensions: 74 x 75 x 210mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use…
I made these lids for my grandmother so she could easily see which pod is which. It's for the Tassimo Pod Rondell by Michael. 75mm x 75mm Printed in PLA using CHEPs fast profile for Ender 3 S1 Pro. 0.28mm layer height Supports touching…
tassimo capsule holder Capacity is 13 capsules
Français Boîte de rangement imprimable en 3D pour kit de capsules Tassimo réutilisables : tamper + 4 dosettes inox et couvercles silicone (compatible Bosch Tassimo 60/180/200/220 ml). https://www.amazon.fr/dp/B0D141KN4P Le cylindre de…
Hello, Sharing my project of coffee tamper for Tassimo reusable coffee pods/capsules :) Dimensions: 51x47x55mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs…
magazine style t-disc holder with rubberband for lift. fitst 8 capsules holder printed with 10% innfil and lift plate with 50% and 5 perimeter walls in PETG on Prusa CORE one
magazine style t-disc holder with rubberband for lift. fitst 8 capsules holder printed with 10% innfil and lift plate with 50% and 5 perimeter walls in PETG on Prusa CORE one
Français Boîte de rangement imprimable en 3D pour kit de capsules Tassimo réutilisables : tamper + 4 dosettes inox et couvercles silicone (compatible Bosch Tassimo 60/180/200/220 ml). https://www.amazon.fr/dp/B0D141KN4P Le cylindre de…
Just added a simple holder on the side of the capsule storage, for the Tassimo pod opener I use. This means, hopefully, you can't lose it. The storage holder was a design on MakerWorld, whilst the opener, was on Printables. Due to a…
Remix of Tassimo Capsule Opener by ceres. Reshaped and lengthened the handle and added scraper tip to the end. Photo notes: Grey is Elegoo Rapid PETG at 0.08, Black is Polysonic PLA at 0.20. Printer: K1_Max.
Темпер повторяющий 1:1 оригинальный. Материал печати PLA/PETG. @Поддержки- нет @Слой 0.16 Сопло 0.4
Ready to deploy a more efficient coffee setup? The Moloch Tassimo Tactical Organizer is a robust, modular 3D-printable system designed to bring order and accessibility to your Tassimo coffee pod collection. This rail system provides…
Did you notice? the support of the Bosch Tassimo can be placed in 2 positions: But in the low position, it is too low and in the high position it is too high. So I made a booster that allows to save 30 mm. The 3 feet are placed without…
Just added a simple holder on the side of the capsule storage, for the Tassimo pod opener I use. This means, hopefully, you can't lose it. The storage holder was a design on MakerWorld, whilst the opener, was on Printables. Due to a…
This is just a very basic Tassimo T-Disc holder, it hold standard size T-Disc and there are three designs. open back Closed back Half back Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Category:…
So I should do what I want with it? Ok, then I redesigned the holder so that you can attach the Tassimo boxes to any refrigerator or any other metallic surface. Six square magnets with 5mm x 5mm x 5mm are required. They are simply pressed…
There are 2 versions, one for drilling and one for mounting with adhesive tape. The holder can be printed on the back without support. But I printed it for upright. I think the surface looks better. Unfortunately, it has to be printed…
I am currently so excited about the Ikea Skadis that I use them in several places in the home office. Since I also have a Tassimo coffee maker there I still needed appropriate holder. Unfortunately, I could not find one on the internet,…
Tassimo mount that holds two boxes together and fits to the IKEA Skadis. I printed it with tree support on the hooks and at the curve on the front.
grille de remplacement pour machine a café tassimo Category: Replacement Parts
A simple Tassimo Skadis Dispenser with mounting holes for T-Nuts Mounting System . Two basic versions for the discs with a height of 18mm and for the bigger discs an high of 30mm. And also two extensions that can be used alternately:…
A remix of the original Tassimo capsule dispenser that can easily fit 15 capsules instead of 12. Original model on the left, remixed model on the right. Height (250 mm) is exactly the maximum allowed by my BambuLab P1S.
This a simple Wallmount for: https://www.printables.com/de/model/678359-tassimo-capsule-dispenser-larger I'm not the Creator of the Capsule-Dispenser, just of this Wallmount for it.
About A simple clip to hang Tassimo capsule packages on a shelf of the Ikea IVAR system. The single sided version is for hanging the packages below a shelf, the double sided version is on the photo. Should fit any shelf with the same…
Organizer for reusable Tassimo coffee pods from aliexpress and tamper taken from https://www.printables.com/model/482943-coffee-tamper-for-reusable-pod-for-tassimo-machine There is a place for: metal capsule 4 silicone covers plastic…
