HULA adaptor feet for Voron 0.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable feet to make the HULA for Voron anti vibration system work with Voron 0.2 printers.
- Ocena
- 4,5 / 5
- Polubienia
- 41
- Pobrania
- 149
- Wydruki
- 2
- Wyświetlenia
- 848
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was really interessted in the HULA for Voron anti vibration feet. Unfortunately the official project only has support for the big printers.
To use as much of the official models as possible I designed these feet adaptors to work with the Voron 0.2 feet and the Switchwire plates from the official HULA kit.
I printed the feet with ABS but PETG should be fine as well. If you have problems with overhangs, you can add support for the bolthead screw hole during the slicing.
BOM:
4X M3X10 BHSC
4X M3 washers (optional)
Print settings:
Material: PETG/PLA+/ABS
Layer Height: 0.2mm
Walls: 5
Infill: Grid, 35%