1 / 3
HSW - Honeycomb storage wall for the Creality K1, K1C and K1 SE printers — zdjęcie 1
1 / 3

HSW - Honeycomb storage wall for the Creality K1, K1C and K1 SE printers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my adaptation of the great HSW for the Creality K1, K1C and K1 SE printers.

Ocena
5 / 5
Polubienia
263
Pobrania
1009
Wydruki
9
Wyświetlenia
8291
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hey.

I adapted the HSW wall for the side panels of my K1C printer.

It should work on the K1 as it works on the K1C and K1 SE (thanks @NewBloodDan_1468366). If you install this on a K1 printer please let me know so i can update this description ;).

They are 2 main pieces, one for the up side and another for the down side of the printer. 

They attach to the printer using the side panel screw holes and 4x M3x10mm screws (maybe M3x8 or M3 by 9 would fit too, dunno, need to test it).

You should join the 2 panels in the middle with at least one of the dual inserts the original HSW creator provided.

Once you fixed then with the 4 screws and 2 dual inserts of your choice, they stay pretty stable on the printer.

Total print time was about 2h30min on the K1C for the 2 panels and 2 inserts, with 0.24mm layer height and using generic PLA and generic PLA settings on the Creality Print slicer.

Hope someone enjoys this as much as i do.

Cheers.

 

Edit sep/2024: It works on the Creality K1 SE

Tagi