IKEA SKÅDIS mount for PARKSIDE Cordless Screwdriver (PAS 4 D7)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to hold a PARKSIDE cordless screwdriver "PAS 4 D7" on an IKEA SKÅDIS board.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 904
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA SKÅDIS mount for PARKSIDE Cordless Screwdriver (PAS 4 D7)
At the time of publishing this model, Lidl offered the “PARKSIDE Akku-Schrauber 4 V” ("PARKSIDE Cordless Screwdriver 4V") in Germany for 9.99€. I often stock up on affordable battery-driven tools during sales, so I purchased one and sought a storage solution for my IKEA SKÅDIS pegboard.
I discovered an excellent model by kjbturok: Original Model on Makerworld.
The cordless screwdriver comes with two bit holders, several bits, and an extension. To store everything together, I extended the original model by adding two slots to hold the bit holders. The extension is conveniently stored directly in the screwdriver, held in place with a magnet. This remix provides a convenient and organized way to keep your screwdriver and accessories readily accessible on your IKEA SKÅDIS pegboard.
The model prints fine on a Bambu Lab A1 without supports. PLA with 2 wall loops and 15% grid infill seems to be stable enough to hold the device. The pockets for the bit holders might have a not-so-smooth bottom, but this should not matter as it is not visible when the bit holders are in place.