1 / 2
Simagic P2000 Pedals Base Shaker Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for the cheap 25W Base Shakers
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter for cheap 25W 50mm little base shakers to fit the P2000 Simagic Pedals.
You will need:
- 1 x M5 x 12mm socket head screw (to screw into the base shaker)
- 2 x M5 x 35mm socket or button head screws and nuts (to clamp the adapter to the pedals
I have tested on my rig and the shaker clears the brake fluid reservoir when braking, but I guess it all depends on the travel you have in the pedals.
Not sure if it's just coincidence, but I had one printed out of PETG and one in PLA. The PLA one made a very different sound, more mechanical, the PETG was more dampened and deeper. So if that happens to you, just print them in PETG.